The aerobatic ace among the scale gliders

The FOX from D-POWER is a true to original glider model with 215cm wingspan and impressive flight characteristics. The model is perfectly designed for aerobatics and shows an impressive flight pattern in thermals.

This 2021 version of the FOX has been further optimized compared to its 2018 predecessor. For example, the new FOX now comes in ARF+ equipment, which reduces the construction effort to a minimum. In addition, the new version can be converted to electric operation very easily with the included bulkhead kit.

High-quality fiberglas construction The FOX is manufactured entirely in GRP shell construction. All components are painted in the mold and prefabricated for minimal construction effort. All parts required for construction are included, except for the electronics.

• completely made in high quality GRP shell construction
• design painted in the mold
• Ritz 1-30-10 wing profile
• split wing with carbon fiber wing joiner
• CFRP reinforcements in fuselage and wings
• all control surfaces designed as elastic flaps
• short build time thanks to ARF+ prefabrication level

ARF+ degree of prefabrication We have deliberately decided not to offer you this model with its own motors and servos. Because with the ARF+ equipment you have the possibility to equip your electric glider according to your preferences. All cable layers are completely routed, so you only have to connect your electronic components to the ready-made cable harness and plug the cables in the fuselage into the receiver. Spend minimal time in the tinkering basement - and maximum time on the flying field.

• Cable harness ready installed and integrated
• MULTIlock® wing locking system installed
• MPX high-current connectors installed in fuselage and wing sections
• Pre-turned linkages, all linkages pre-installed
• Aluminum rudder horns on the wings
• Disassembled and removable cockpit with painted pilot figures
• installed main wheel
• Carbon linkages included for all linkages
• including bulkhead set for electrical conversion
• richly illustrated, German-language building instructions

Technical data wingspan: 215cm length: 119cm weight (empty): 1346g Weight (ready to fly glider version): 1798g Wing area: 35,1dm² Wing profile: Ritz 1-30-10 Center of gravity: 35% / about 70mm

Required accessories for the glider version: Servos Elevator: D-Power DS-340BB MG digital servo Servos rudder: D-Power DS-340BB MG digital servo Servos aileron: D-Power DS-140BB MG digital servo Flap servos: D-Power DS-140BB MG digital servo BEC Power supply: D-Power Antares 6A UBEC ESC Battery: D-Power HD-4000 2S Lipo (7,4V) 30C Trim weight: approx. 90g

additional needed accessories for the electric glider version: Motor: D-Power AL 35-08 Brushless Motor speed controller: D-Power Comet 60A S-BEC brushless speed controller Battery for 3S Lipo operation: D-Power HD-2200 3S Lipo (11,1V) 30C Battery for 3S Lipo operation: D-Power HD-3300 3S Lipo (11,1V) 30C Battery for 4S Lipo operation: D-Power HD-2200 4S Lipo (14,8V) 30C Spinner: D-Power Turbo Spinner aluminum with Z-fork 38mm / 5.0