Programming card for D-Power Comet controller

Programming card for D-Power Comet controller

Programming card for the configuration of parameters of D-Power Comet controllers. The controller is connected to the card with the normal servo connector. The following controller parameters can be programmed with the card:

brake on / off Timing (Automatic 7-30° / low 7-22° / high 22-30° ) Battery type (LiPo / NiMH / NiCd) Switch-off voltage for LiPo (2.8V / 3.0 / 3.2) Starting behaviour (soft / normal / hard) Heli Mode (on / off) Motor running direction (forwards / backwards) Switch-off behaviour (reduce power / switch off)